PDA

View Full Version : 13.93@99.2mph--> ashcroft.


proshoraca
10-15-2005, 06:06 PM
well went to the track again last weekend, got that, was pretty disappointed, but then remembered of my stock fuel system, so shall bust out some 24's, MAF and adjustable press. regulator, and try that out.* *

2.007 60 foot(245 street tires)
8.9xx 1/8th mile
13.93@99.2 mph

331hatch
10-16-2005, 09:24 PM
Do you have a stock fuel pump in your car still? If so that pump is probably starving it or is just on its way out. 19's should support up to 300hp but anything above that I would say go with 24's.

proshoraca
10-17-2005, 08:01 PM
ya my fuel system is absolutely 100% stock, other than a filter change haha. and it is very very noisy, i am sure it is running at like 50% effeciency or something. i was thinking it will need to be changed out, i'll just slowly gather parts for the spring season.

331hatch
10-19-2005, 06:10 PM
Sounds like you need to change that pump. Just put in a 255 pump and you should be set. ;)

proshoraca
10-19-2005, 06:40 PM
thanks for the info:)

my plan is this: get a set of 24lb inj's /MAF coming next week, as well as grab an adjustable fuel pressure regulator, as well as a 190 or 255 (not sure which to go with, any reccomendation?) fuel pump, and go with that, i think it should improve things quite well.

331hatch
10-20-2005, 08:23 AM
Sounds like a good plan. You shouldn't need 24's but it wouldn't hurt for a little room to grow in the future if you put different heads on it later. Put the 255 pump in it that way its done and you wont have to change it again later.

proshoraca
10-20-2005, 12:33 PM
Thanks for the thoughts, i will just go 255 then for the extra 10bucks or w/e it would be.

-Ryan

proshoraca
06-21-2006, 11:08 PM
found out my cam is for a pickup truck..... wicked. kinda explains the absolute complete and totall lack of any power above 4700 RPM... ohwell. e-cam arrived today putting in next weekend.